Xerox c7030 как подкачать тонер
Проблема: принтер упорно не подкачивает красный тонер в блок проявки.
Тонер пользуем от ДС 250 (оригинал), девелопер меняли.
Из СМ «диспенсер моторс» крутит шестеренки. Датчики домиков работают.
Почти год не можем локализовать проблему, «спасаемся» принудительной подкачкой красного из СМ притера так и печатаем.
Подскажите, куда копать? Сервис мэн не вариант — нет их у нас.
| Меню пользователя kokain |
| Посмотреть профиль |
| Отправить личное сообщение для kokain |
| Найти ещё сообщения от kokain |
| Меню пользователя zapadlo |
| Посмотреть профиль |
| Отправить личное сообщение для zapadlo |
| Найти ещё сообщения от zapadlo |
Проблема: принтер упорно не подкачивает красный тонер в блок проявки.
Тонер пользуем от ДС 250 (оригинал), девелопер меняли.
Из СМ «диспенсер моторс» крутит шестеренки. Датчики домиков работают.
Почти год не можем локализовать проблему, «спасаемся» принудительной подкачкой красного из СМ притера так и печатаем.
VIDEOMiN .ORG
07:47 
03:41 
05:10 
05:30 
02:17 
02:40 
03:17 
Заправка цветных картриджей для принтера Xerox Versalink C7030
Стоимость заправки цветных картриджей для Xerox Versalink C7030
Выезд по Москве бесплатно.
Заправка картриджей производится с заменой чипа.
Гарантия до конца ресурса.
(Да,мы заправляем стартовые картриджи)
Заправка картриджей производится оригинальным тонером Xerox.
| Модель картриджа | |
| Заправка 106R03745 (23600 стр.) черный | 3900 |
| Заправка 106R03748 (16500 стр.) голубой | 3900 |
| Заправка 106R03747 (16500 стр.) красный | 3900 |
| Заправка 106R03746 (16500 стр.) желтый | 3900 |
| Картридж для Xerox Versalink c7030dn | по 4500 рублей |
| Бокс для отработанного тонера 115R00128 | 1800 рублей |
| Модель принтера | Xerox Versalink C7030 |
| Новый совместимый картридж | уточните у менеджера |
| Новый оригинальный картридж | Уточните у менеджера |
Мы производим заправку картриджей в следующих моделях принтеров:
— Xerox Versalink C7030
— Xerox Versalink C7025
— Xerox Versalink C7020
Расходные материалы для Xerox Versalink C7030:
| региональность — MEA |
| Тонер-картриджи |
| 106R03745 черный — 23600 стр. |
| 106R03748 синий — 16500 стр. |
| 106R03747 красный — 16500 стр. |
| 106R03746 желтый — 16500 стр. |
| Принт-картриджи |
| 113R00780 CMY — по 87000 страниц |
| 113R00780 черный — 109000 страниц |
| Бункер отработанного тонера — 30000 страниц |
Заправка картриджей для лазерного принтера Xerox C7030 включает в себя выполнение следующих операций:
- — Разборка картриджа
- — Оценка элементов картриджа на исправность
- — Очистка картриджа от остатков неизрасходованного тонера
- — Заправка новым тонером
- — Сборка картриджа
- — Установка нового чипа
- — Проверка картриджа на работоспособность.
- — Выдача гарантии на выполненные работы
Услуга по заправке картриджей предоставляется на территории всей Москвы и ближнего Подмосковья.
Как производится заправка цветных картриджей для Xerox Versalink C7030 в нашей компании.
Заправка картриджей для Xerox Versalink C7030 происходит с использованием сертифицированного тонера высокого качества. В услугу по заправке картриджа входит его очистка от остатков старого тонера и заправка картриджа новым тонером.
Клиент лично выбирает, где будет произведена заправка картриджей. Если у вас нет возможности приехать к нам в офис, наши мастера приедут к вам. Для выполнения заправки картриджей на выезде требуется предоставить нашему специалисту рабочее пространство – чистый стол.
Заправка картриджа на выезде занимает 10-20 минут.
Так же возможен заказ услуги в праздничные и выходные дни. Для выезда нашего мастера вам необходимо оформить только заявку.
Благодаря многолетнему опыту работы, мы выполняем заправку картриджей качественно и быстро, гарантируя исправность картриджей без ограничения по времени, вплоть до выработки всего тонера.
При желании клиента, представители нашей имеют возможность обменять заправленные картриджи на пустые по указанному клиентом адресу или осуществить экспресс заправку картриджей на месте. При заказе наших услуг на заправку картриджей от 2 штук и более, вы получаете скидку.
Xerox Versalink C7030 User Manual
Copyright protection claimed includes all forms and matters of copyrightable material and information now allowed by statutory or judicial law or hereinafter granted including without limitation, material generated from the software programs which are displayed on the screen, such as icons, screen displays, looks, etc.
Changes are periodically made to this document. Changes, technical inaccuracies, and typographic errors will be corrected in subsequent editions.
Xerox® Security Guide for Office Class Products: AltaLink® VersaLink®
Table of Contents
Controller External Interfaces.
Front Panel USB (Type A) port(s) .
10/100/1000 MB Ethernet RJ-45 Network Connector.
Rear USB (Type B) Target port.
RJ-11 Analog Fax and Telephone .
Wireless Network Connector.
Near Field Communications (NFC) Reader .
SMART CARD – CAC/PIV .
Foreign Product Interface.
User Data Protection.
User Data protection while within product.
Media Sanitization (Image Overwrite) .
Immediate Image Overwrite .
On-Demand Image Overwrite .
User Data in transit .
Inbound User Data .
Print Job Submission.
Xerox® Security Guide for Office Class Products: AltaLink® VersaLink®
Outbound User Data .
Scanning to Network Repository, Email, Fax Server .
Scanning to User Local USB Storage Product .
Add on AppsCloud, Google, DropBox, and others .
4 Network Security.
TCP/IP Ports & Services .
Listening services (inbound ports) .
Wireless 802.11 Wi-Fi Protected Access (WPA) .
Public Key Encryption (PKI) .
Email Signing and Encryption using S/MIME.
Network Access Control.
Cisco Identity Services Engine (ISE) .
Cisco ISE allows you to deploy the following controls and monitoring of Xerox products.
Contextual Endpoint Connection Management .
FIPS140-2 Compliance Validation .
Additional Network Security Controls.
Endpoint Firewall Options .
IP Whitelisting (IP Address Filtering).
Stateful Firewall (Advanced IP Filtering) .
5 Device Security: BIOS, Firmware, OS, Runtime, and Operational security controls.
Fail Secure Vs Fail Safe.
Boot Process Security.
Xerox® Security Guide for Office Class Products: AltaLink® VersaLink®
Event Monitoring & Logging .
Service Technician (CSE) Access Restriction .
Additional Service Details .
Backup & Restore (Cloning).
XCP (eXtensible Customizable Platform) .
6 Configuration & Security Policy Management Solutions .
7 Identification, Authentication, and Authorization.
AltaLink® and VersaLink® devices support the following authentication mode: .
Smart Card Authentication .
Simple Authentication (non-secure) .
Authorization (Role Based Access Controls) .
8 Additional Information & Resources.
Responses to Known Vulnerabilities.
Appendix A: Product Security Profiles .
AltaLink® C8030 / C8035 / C8045 / C8055 / C8070 .
VersaLink® B7025, B7030 B7035 .
VersaLink® C7000, C7020, C7025, C7030 .
VersaLink® C400, C405 .
VersaLink® B400, B405.
VersaLink® C500, C600, C505, C605 .
VersaLink® B600, B605, B610, B615.
VersaLink® C8000, C9000 .
Xerox® Security Guide for Office Class Products: AltaLink® VersaLink®
Appendix B: Security Events .
Xerox AltaLink® Security Events .
VersaLink® Security Events .
Xerox® Security Guide for Office Class Products: AltaLink® VersaLink®
The purpose of this document is to disclose information for the Xerox ® Office Class printers and multifunction products (hereinafter called as “the product” or “the system”) with respect to product security. Product Security, for this paper, is defined as how image data is stored and transmitted, how the product behaves in a network environment, and how the product may be accessed both locally and remotely. The purpose of this document is to inform Xerox customers of the design, functions, and features of the product with respect to Information Assurance. This document does not provide tutorial level information about security, connectivity, or the product’s features and functions. This information is readily available elsewhere. We assume that the reader has a working knowledge of these types of topics.
The target audience for this document is Xerox field personnel and customers concerned with IT security.
The information in this document is accurate to the best knowledge of the authors and is provided without warranty of any kind. In no event shall Xerox be liable for any damages whatsoever resulting from user’s use or disregard of the information provided in this document including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Xerox has been advised of the possibility of such damages.
Xerox® Security Guide for Office Class Products: AltaLink® VersaLink®
2 Product Description
AltaLink® and VersaLink® products consist of an input document handler and scanner, marking engine, controller, and user interface. A typical configuration is depicted below. Please note that options including finishers, paper trays, document handers, etc. may vary configuration, however, they are not relevant to security and are not discussed.
Bypass paper feed tray.
Front USB Port(s)*
Optional Wi-Fi dongle port*
Touch screen user interface.
RJ45 Ethernet connection*
Upper paper tray.
Lower paper tray.
(May require disassembly to access).
Paper feed trays.
*Denotes a security related component
AltaLink® and VersaLink® products share a common architecture which is depicted below. The following sections describe components in detail.
Xerox® Security Guide for Office Class Products: AltaLink® VersaLink®
The user interface detects soft and hard button actuations and provides text and graphical prompts to the user. The user interface is sometimes referred to as the Graphical User Interface (GUI) or Local UI (LUI) to distinguish it from the remote web server interface (WebUI).
The user interface allows users to access product services and functions. Users with administrative privileges can manage the product configuration settings. User permissions are configurable through Role Based Access Control (RBAC) policies, described in section 7 Identification, Authentication, and Authorization
The scanner converts documents from hardcopy to electronic data. A document handler moves originals into a position to be scanned. The scanner provides enough image processing for signal conditioning and formatting. The scanner does not store scanned images .
The Marking Engine performs copy/print paper feeding and transport, image marking, fusing, and document finishing. The marking engine is comprised of paper supply trays and feeders, paper transport, LED scanner, xerographics, and paper output and finishing. The marking engine is only accessible to the Controller via inter-chip communication with no other access and does not store user data .
The controller manages document processing using proprietary hardware and algorithms to process documents into high-quality electronic and/or printed reproductions. Documents may be temporarily buffered in RAM during processing. Some models may be equipped with additional storage options such as magnetic Hard Disk Drive (HDD), Solid State Disk (SSD), SD Card, or Flash media. For model specific details please see Appendix A: Product Security Profiles. AltaLink® and VersaLink® products encrypt user data and include media sanitization (overwrite) options that ensure that erased data cannot be recovered, described further in section 3 User Data Protection.
In addition to managing document processing the controller manages all network functions and services. Details can be found in section Network Security.
The controller handles all I/O communications with connected products. The following section provides a description of each interface. Please note that not all interfaces are supported on all models; details about each model can be found in Appendix A: Product Security Profiles.
Controller External Interfaces
Front Panel USB (Type A) port(s)
One or more USB ports may be located on the front of the product, near the user interface. Front USB ports may be enabled or disabled by a system administrator. The front USB port supports the following:
Walk-up users may insert a USB thumb drive to store or retrieve documents for scanning and/or printing from a FAT formatted USB device. The controller will only allow reading/writing of a limited set of known document types (such as DOC, PDF, PNG, JPEG, TIFF, etc.). Other file types including binary executables are not supported.
Note that features that use the front USB ports (such as Scan To USB) can be disabled independently or restricted using role-based access controls.
Connection of optional equipment such as NFC or CAC readers.
Firmware updates may be submitted through the front USB ports. (Note that the product must be
configured to allow local firmware updates, or the update will not be processed.
Xerox® Security Guide for Office Class Products: AltaLink® VersaLink®
10/100/1000 MB Ethernet RJ-45 Network Connector
This is a standard RJ45 Ethernet network connector and confirms to IEEE Ethernet 802.3 standards.
Rear USB (Type B) Target port
A USB type B port located on the controller board at the rear of the product. This port supports the following:
USB target connector used for printing
Note: This port can be disabled completely by a system administrator.
RJ-11 Analog Fax and Telephone
The analog fax module connects to the controller. The fax connection supports the Fax Modem T.30 protocol only and will not accept data or voice communication attempts. An external (EXT) is available to connect an external handset. In this configuration, the FAX card acts as a passive relay.
Wireless Network Connector
VersaLink® products accept an optional wireless module via a proprietary port.
AltaLink® products accept an optional wireless kit that can be installed in the rear USB port.
Near Field Communications (NFC) Reader
The system supports an installable RFID reader for authentication and convenience in certain configurations. VersaLink® products accept the RFID reader via USB on the front of the product. AltaLink® products come standard with an RFID reader built into the front panel. This communication cannot write or change any settings on the system. The data exchanged is not encrypted and may include information including system network status, IP address and product location. NFC functionality can be disabled using the embedded web server of the product. NFC functionality requires a software plugin that can be obtained from Xerox sales and support. NFC functionality is supported via optional touch screen user interface or optional dedicated NFC USB dongle.
Information shared over NFC includes: IPv4 Address, IPv6 Address, MAC Address, UUID (a unique identifier on the NFC client), and Fully qualified domain name
SMART CARD – CAC/PIV
All VersaLink® products support CAC/PIV login by enabling the VersaLink® Plug-in feature and then enabling the appropriate plug-in. Additional plug-ins can be downloaded from Xerox.com in the product Support area online.
All VersaLink® products support SIPR network access through a plug-in. The SIPR network plug-in is restricted only to users who have purchased the SIPR kit from Xerox. Contact your Xerox sales representative for details.
Foreign Product Interface
This port is used to connect optional equipment to control access to the machine. A typical application is a coin-operated product where a user must deposit money to enable the machine to print. The information available via the Foreign Product Interface is limited to optically-isolated pulses that can be used to count impressions marked on hardcopy sheets. No user data is transmitted to or from this interface.
Xerox® Security Guide for Office Class Products: AltaLink® VersaLink®
3 User Data Protection
Xerox printers and multifunction products receive, process, and may optionally store user data from several sources including as local print, scan, fax, or copy jobs or mobile and cloud applications, etc. Xerox products protect user data being processed by employing strong encryption. When the data is no longer needed, the Image Overwrite (IIO) feature automatically erases and overwrites the data on magnetic media, rendering it unrecoverable. As an additional layer of protection, an extension of IIO called On-Demand Image Overwrite (ODIO) can be invoked to securely wipe all user data from magnetic media.
User Data protection while within product
This section describes security controls that protect user data while it is resident within the product. For a description of security controls that protect data in transit please refer to the following section that discusses data in transit; also the Network Security section of this document.
All user data being processed or stored to the product is encrypted by default. Note that encryption may be disabled to enhance performance on AltaLink® products (though this is not recommended in secure environments). Xerox VersLink products do not have such an option.
The algorithm used in the product is AES-256. The encryption key is automatically created at start up and stored in the RAM. The key is deleted by a power-off, due to the physical characteristics of the RAM.
Some models include a Trusted Platform Module (TPM). The TPM is compliant with ISO/IEC 11889, the international standard for a secure cryptoprocessor, dedicated to secure cryptographic keys. The TPM is used to securely hold the product storage encryption key. Please refer to Appendix A: Product Security Profiles for model specific information.
Media Sanitization (Image Overwrite)
AltaLink® and VersaLink® products equipped with magnetic hard disk drives are compliant with NIST Special Publication 800-88 Rev1: Guidelines for Media Sanitization. User data is securely erased using a three-pass algorithm as described in the following link: https://nvlpubs.nist.gov/nistpubs/specialpublications/nist.sp.800-88r1.pdf
Note: Solid State storage media such as Solid-State Disk, eMMC, SD-Card, and Flash media cannot be completely sanitized by multi-pass overwriting methods due to the memory wear mapping that occurs. (Additionally, attempts to do so would also greatly erode the operational lifetime of solid state media). Solid State media is therefore not recommended for use in highly secure environments. Please refer to NIST-800-88 “Table A-8: Flash Memory-Based Storage Product Sanitization” for technical details.
Immediate Image Overwrite
When enabled, Immediate Image Overwrite (IIO) will overwrites any temporary files that were created on the magnetic hard disk that may contain user data. The feature provides continuous automatic overwriting of sensitive data with minimal impact to performance, robust error reporting, and logging via the Audit Log.
On-Demand Image Overwrite
Complementing the Immediate Image Overwrite is On-Demand Overwrite (ODIO). While IIO overwrites individual files, ODIO overwrites entire partitions. The ODIO feature can be invoked at any time and optionally may be scheduled to run automatically.
Xerox® Security Guide for Office Class Products: AltaLink® VersaLink®
User Data in transit
This section focuses on the protection of user data (print/scan/other jobs) in transit as they are submitted to the product for processing and/or are sent from the product to other systems. Additional protections are also discussed in the Network Security section of this document.
Inbound User Data
Print Job Submission
In addition to supporting network level encryption including IPSec and WPA Xerox products also support encryption of print job data at the time of submission. This can be used to securely transmit print jobs over unencrypted connections or to enhance existing network level security controls.
Submit print jobs via Secure Internet Printing Protocol. This protocol is
based on HTTP and utilizes the TLS suite to encrypt data.
Securely submit a print job directly to product via the built-in web server.
Xerox Print Stream
The Xerox Global Print Driver® supports document encryption when
submitting Secure Print jobs to enabled products. Simply check the box to
Enable Encryption when adding the Passcode to the print job.
Outbound User Data
Scanning to Network Repository, Email, Fax Server
AltaLink® and VersaLink® multifunction products support scanning of hardcopy documents to external network locations including file repositories and email and facsimile services. In addition to supporting network level encryption including IPSec and WPA Xerox products support the following.